Announcement

Collapse
No announcement yet.

Purchased a new 120 hr drive.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Purchased a new 120 hr drive.

    When I opened the Tivo box I found that I had two 30 gig drives. I replaced one of them with the new 120 gig and when I powered back up I got locked into a "Starting up" screen.
    The question is , should I have removed both of the 30 gig drives or should there have been a specific one that should have been replaced with the 120 hr.
    HELP!

  • #2
    IF you got a replacement drive kit, then you must remove both drives from your TiVo.

    Comment


    • #3
      Originally posted by WK-Jeff View Post
      IF you got a replacement drive kit, then you must remove both drives from your TiVo.
      Jeff
      I replaced the 120 into the A slot and removed the other 30. Tivo now works but it is recording the wrong channels. Any ideas??

      Comment


      • #4
        You probably just need to redo Guided Setup and watch carefully when it tests its connection to your cable box.
        Been here a long time . . .

        Comment


        • #5
          Originally posted by WK-Michael View Post
          You probably just need to redo Guided Setup and watch carefully when it tests its connection to your cable box.

          Tried that but when I try to go to guided set up it tells me to press thumbs down 3 times and then hit submit,, then NOTHING happens.

          Comment


          • #6
            It should be Enter, right? Is that what you're pressing? Not Select.
            Been here a long time . . .

            Comment


            • #7
              Oops!! My bad. I will try it the right way now.

              Comment


              • #8
                Completely reset

                and it is still not changing channels. It shows that it is on the channel that you punched in but it shows channel 4 programming.

                Comment


                • #9
                  Sounds like the connection between your cable box and the TiVO is bad or you are choosing the wrong set of commands for your cable box.

                  Comment


                  • #10
                    Originally posted by WK-Jeff View Post
                    IF you got a replacement drive kit, then you must remove both drives from your TiVo.
                    After removing both drives and installing the new one I am still unable to get the Tivo to change channels. The way that my sil had it set up we were not using the IR.

                    Comment


                    • #11
                      If it worked before, but not after, then it is definitely a setup issue. Channel changing is not a hard drive issue.

                      Comment


                      • #12
                        Finally figured out that I did not need IR. When I put in a splitter, took one leg to the Tivo and went from there to TV. Then on setup I said antenna instead of cable box and it is working fine now.

                        Comment


                        • #13
                          That makes sense. It thought you had a cable box before, but it sounds like you don't have one.
                          Been here a long time . . .

                          Comment


                          • #14
                            Originally posted by WK-Michael View Post
                            That makes sense. It thought you had a cable box before, but it sounds like you don't have one.
                            I do have a cable box. One cable goes to Tivo in and the other goes to the cable box and then the RCA cable from the Tivo to the television.

                            Comment


                            • #15
                              So then you can't record any premium channels, right?
                              Been here a long time . . .

                              Comment

                              Working...
                              X