Tweet
Traveling Member
Using the SWM8 with Motosat Slimline 5 dish and Nomad 2 controler. System required one cable from dish to go directly to controler then to SWM8. This hookup works with the exception of no even transponders on sat 99. Is this problem related or do I have an LNB issue?
-
-
I'm not familiar with this setup, but it sure sounds like you might have a problem with that Nomad controller being in the mix. You should contact Motosat and ask whether you can use a standard 6x8 multiswitch with this setup, and how you do it. You should be able to substitute the SWM8 for the 6x8, assuming the system can work with a 6x8. Make sense?
Comment