Tweet
Greetings,
Original subject fixed by rebooting. Now I have another problem.
Everything completed ok but my list of available channels has no channels below 100. I called DirecTV and they confirm that I do have the local channels active at their end. I've checked the signals of the satellites, looked at a bunch of transponders on all three satellites. All signal strengths are 85-93. All the different menu choices and guides only show channels above 99. I have a second DirecTivo in the other room on the same dish and it gets all the channels from 2 to 100 and up. I've rebooted several times with no change. This all occured after putting in a new weaknees hard drive. That fixed all the other problems I was having as well as doubled my recording time. It only took about 10 minutes to do the swap but I've spent hours trying to get the local channels active. I've also redone the Guided Setup three times with no help.
Anyone have any ideas?
Thanks,
Art K6KFH
Original subject fixed by rebooting. Now I have another problem.
Everything completed ok but my list of available channels has no channels below 100. I called DirecTV and they confirm that I do have the local channels active at their end. I've checked the signals of the satellites, looked at a bunch of transponders on all three satellites. All signal strengths are 85-93. All the different menu choices and guides only show channels above 99. I have a second DirecTivo in the other room on the same dish and it gets all the channels from 2 to 100 and up. I've rebooted several times with no change. This all occured after putting in a new weaknees hard drive. That fixed all the other problems I was having as well as doubled my recording time. It only took about 10 minutes to do the swap but I've spent hours trying to get the local channels active. I've also redone the Guided Setup three times with no help.
Anyone have any ideas?
Thanks,
Art K6KFH
Comment