Announcement

Collapse
No announcement yet.

Tivo Series 3 wavy/banded component output

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tivo Series 3 wavy/banded component output

    Have you ever seen that? The hdmi output is fine currently, but I'd prefer to connect it through the component due to an overabundance of other hdmi connections. I've checked with 2 cables and both show the issue, and the tv is fine with other component sources.

    I actually replaced the power supply on this unit 3 years ago with one from weaknees, so I wouldn't immediately suspect a power supply issue, though I guess some power noise could be causing that. Any brilliant ideas? My wide thinks the degradation has been getting slowly worse over the last 3 months or so, but it's been unwatchable for the last month.

  • #2
    Haven't seen that.

    Could it be the TV itself? Have you tried other TVs with component inputs or different component inputs on this TV?

    Or a bad component cable?
    Been here a long time . . .

    Comment


    • #3
      I've swapped the cables, and also changed component input ports, and see the same issue. Using different sources on the same component ports on the TV is fine, so it's almost certainly the tivo. I can live with it for now by using a hdmi switch box on the TV, but if there was some reasonably simple fix that would be nice. I suppose after 8 years I can't really complain that much.

      Comment


      • #4
        Sorry to say, I really don't think that's something we'll be able to fix.
        Been here a long time . . .

        Comment

        Working...
        X