Tweet
Hello, I could use some help. My Roamio OTA boots up and shows the startup screens "Welcome starting up..." and "Almost there..." just fine.
Then it shows the "One moment..." screen, and there is a light snow flickering on the screen and occasional flashes of horizontal lines.
When it reaches the main menu, the snow and flashing lines continue. I can read the menu and navigate. The snow and lines remain visible if I watch a recording. The snow is tiny white dots flickering over the screen but not obscuring the video.
I have changed the video resolution from Auto to everything else and get the same symptoms, all the way down to 480p where they go away. .Anything above that is bad.
Front lights are normal and everything else is normal. I've tried swapping out five HDMI cables and three HDMI inputs to the TV, all with the same results. I'm pretty sure the problem is in the Tivo video output module but don't know if I can replace it. Any help is appreciated.
Bill
Then it shows the "One moment..." screen, and there is a light snow flickering on the screen and occasional flashes of horizontal lines.
When it reaches the main menu, the snow and flashing lines continue. I can read the menu and navigate. The snow and lines remain visible if I watch a recording. The snow is tiny white dots flickering over the screen but not obscuring the video.
I have changed the video resolution from Auto to everything else and get the same symptoms, all the way down to 480p where they go away. .Anything above that is bad.
Front lights are normal and everything else is normal. I've tried swapping out five HDMI cables and three HDMI inputs to the TV, all with the same results. I'm pretty sure the problem is in the Tivo video output module but don't know if I can replace it. Any help is appreciated.
Bill