Tweet
no sound and no picture
I just installed a new hdd , but there is no sound or picture. There was both before the install. The unit does come on the yellow lights and then the red comes on, the unit welcome appears and then setup. but there is nothing on the tv. I have checked all of the cables both inside and out of the unit and to the tv. Any help would be great. The unit is a toshiba rs-tx60. thanks 2boot
-
Last edited by 2boot; 02-18-2010, 02:12 PM. -
I would strongly recommend that you carefully check your cabling again (and again) from the cable box (if any) to the TiVo and then from the TiVo to the TV. This is very likely a cabling problem. -
no sound and no picture
Thanks for the quick reply, I did the cable thing three times and still no sound or picture. What do you suggest to do next? thanks 2bootComment
-
You sure you're watching the right input on your TV?Comment
-
no sound or picture
Tryed another set of cables and all has went well, now working great life is good again,Thanks for all of your help. 2bootComment
-
Glad to hear it; it sure sounded like something simple (and non-TiVo related).Comment
Comment