I have a HDVR2 series 2 DirecTV unit that is stuck at the "welcome... powering up" screen. I spoke with a rep and they felt it was the hard drive so I ordered a new hard drive and put it in and it's still happening.
After speaking to a tech (who claimed there's no way to test the power supply with a meter to see if it's failing.. which to me sounds ridiculous... I"d just have to get a new PS and see if that helped.) I tested the PS and it was outputting the proper 5 and 12 volts. Just in case the power dropped under load, I hooked up an external PS to power the hard drive and still the unit would not get past the welcome screen. The green and red lights on the drive do light. It just never gets off the welcome screen.
Does anyone have any ideas?
Can I return the WK upgrade kit? Are they going to hit me up with a restocking fee or something?
After speaking to a tech (who claimed there's no way to test the power supply with a meter to see if it's failing.. which to me sounds ridiculous... I"d just have to get a new PS and see if that helped.) I tested the PS and it was outputting the proper 5 and 12 volts. Just in case the power dropped under load, I hooked up an external PS to power the hard drive and still the unit would not get past the welcome screen. The green and red lights on the drive do light. It just never gets off the welcome screen.
Does anyone have any ideas?
Can I return the WK upgrade kit? Are they going to hit me up with a restocking fee or something?
Comment