I have a DirecTv Tivo DVR40
A couple of years ago I upgraded the hd using a 100gb drive
I purchased a 6.2 iso from someone on ebay as I wanted to network
this unit with my DirecTv DVR2 unit
Now I replaced the 100gb drive with a 250gb drive
Since I wanted to keep the recorded shows I used a Disk Jockey to
image the 100gb drive to the new 250gb drive
I installed the 250 drive and booted the unit up, everything works,
shows still there but it reports 87 hour capacity
So I need to expand the volume to it's full capacity
I guess I need to "Bless" the drive, but not sure exactly how to do
this
Also about a year ago DirecTv pushed down a DST fix which disabled
my ability to transfer shows from one unit to the other, the HMO is
still working to the extent that I can telnet into this unit, I just
can transfer shows bewteen units
To install the HMO I was instructed to run an app called something
like 6.2hmo Can I safely run that again or can I edit and exsisting file
to restore the transfer if so what is the filename and path as well as
the line to be edited and the change required
Thanks
Bruce
A couple of years ago I upgraded the hd using a 100gb drive
I purchased a 6.2 iso from someone on ebay as I wanted to network
this unit with my DirecTv DVR2 unit
Now I replaced the 100gb drive with a 250gb drive
Since I wanted to keep the recorded shows I used a Disk Jockey to
image the 100gb drive to the new 250gb drive
I installed the 250 drive and booted the unit up, everything works,
shows still there but it reports 87 hour capacity
So I need to expand the volume to it's full capacity
I guess I need to "Bless" the drive, but not sure exactly how to do
this
Also about a year ago DirecTv pushed down a DST fix which disabled
my ability to transfer shows from one unit to the other, the HMO is
still working to the extent that I can telnet into this unit, I just
can transfer shows bewteen units
To install the HMO I was instructed to run an app called something
like 6.2hmo Can I safely run that again or can I edit and exsisting file
to restore the transfer if so what is the filename and path as well as
the line to be edited and the change required
Thanks
Bruce
Comment