Announcement

Collapse
No announcement yet.

Cake bake first drive and need to add second

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Cake bake first drive and need to add second

    I used cake bake to build a new tivo system after a HD crashed. I would now like to add a second drive. I tried just doing a blessTiVo on the drive and it reported everything ok. The tivo still does not recongize it however. Do I need to do a mfsadd to the drives and does the now working first drive get affected on during this process.
    mfsadd -r 4 -x /dev/hdX /dev/hdZ

    This is a 540080
    Tags: None
  • #2
    BlessTiVo does not work if the original drive is not the factory drive. Yo uwould need to run the mfsadd command to marry the two drives.

    Comment

    • #3
      Will the boot drive is still ok

      The working boot drive will not be affect right??? Thanks again

      Comment

      • #4
        Well, it will in that it will then need to see the second drive to work. But settings and programs won't be lost as long as it's done correctly.
        Been here a long time . . .

        Comment

        • #5
          Originally posted by mountaintop View Post
          I used cake bake to build a new tivo system after a HD crashed. I would now like to add a second drive. I tried just doing a blessTiVo on the drive and it reported everything ok. The tivo still does not recongize it however. Do I need to do a mfsadd to the drives and does the now working first drive get affected on during this process.
          mfsadd -r 4 -x /dev/hdX /dev/hdZ

          This is a 540080
          funny u used cake bake in building a new tivo system.

          Comment

          Previous template Next
          Working...
          X