Tweet
Something new has been happening in the last week or two. I've got a Toshiba HD DLP television. When I press the Tivo button to get to the main menu, it causes my television to change "input" from the Tivo input to Antenna 1 (the first selection on my input menu) I have to fool around and re select the Tivo input, and then change the channel to 03 again. This sometimes happens several times until everything settles down and I can watch the Tivo. This may have started happening when I connected my Series 1 to the network and another television in the house. Has anyone else heard of this going on? I tried rebooting everything, and re-entering the Toshiba remote code (first one in the list) but it still happens.
-
-
If you're having overlap between the codes, you could just set the TiVo and the TiVo remote to use a discreet code, and then they shouldn't overlap with the TV anymore.
Full info is here:
http://www.weaknees.com/dvr12.phpBeen here a long time . . . -
Maybe...
The problem I am having is not when I press the channel on the remote, but when I press the "Tivo" button and the Tivo changes from whatever I am watching to the Main Menu. It also happes sometimes when I go from the Main Menu to whatever I have chosen to watch. It is almost like the Tivo unit sends something to the TV telling it to change inputs from where it is on TV Channel 3/Input DVR to input Ant 1. Does the Tivo send out an IR code when it does this? I know a friend used his Tivo with direct tv and had the little IR wand that he used to control the sattelite box...but I don't have anything like that...so either the Tivo is sending a spurious signal itself..or sending something over the HDMI line to the TV. Thoughts?Comment
-
Right, and we are suggesting that you change your remote so that it uses a different set of IR codes for the TiVo.
See:
http://tivosupport2.instancy.com/Lau...7-dcb2fe063fd4Comment
Comment