Thr22

butlertl

Junior Member

Join Date: Jun 2009

Posts: 3
- Share
- Tweet
#1

Thr22

07-10-2012, 10:51 AM

I have a Slimline 3 and just installed. I have a single wire Multi-switch (SWM8R2-03) installed with a splitter. I have an HR10-250, THR22 and an HR23. I have one cable coming from the SWM1 going to a splitter and then to the HR23 and the THR22. The HR10-250 is running from a Legacy output of the Multi-switch.

Does the THR 22 need to run from the SWM 2 output? Can the HR10 be connected to the Splitter?

Thanks
Tags: None
WK-Jeff

Administrator

Join Date: Nov 2006

Posts: 2858
- Share
- Tweet
#2

07-11-2012, 08:15 AM

The THR22 does not need to run from SWM2 if you have an open port on your splitter. The HR10 MUST run off the legacy ports.
Comment
butlertl

Junior Member

Join Date: Jun 2009

Posts: 3
- Share
- Tweet
#3

07-12-2012, 09:32 AM

B Band Converter

Can the THR22 use the B Band Converter? If so, what else would I need?

Thanks
Comment
WK-Jeff

Administrator

Join Date: Nov 2006

Posts: 2858
- Share
- Tweet
#4

07-12-2012, 11:57 AM

No bbcs are used when you are connected to a SWM.
Comment

Announcement