I have a Sony Tivo Series1 SVR-2000 that does not start-up completely to the main Tivo into screen or main menu. I know that this is an older machine but it have lifetime service and so it would be great to get it up and running again.
When I plug it in I can hear the drive spin and feel the fan blowing air out the back of the unit. I can hear the drive reading data in what sounds like a normal manner.
Here is what happens when I try to start up the Tivo:
-------------
Green light comes on
First Screen:
"Your Recorder is starting up.
Please wait a moment.."
Second Screen:
"Almost there.
A few more seconds please..."
Third Screen
"Press POWER to turn on the
recorder."
Green light goes off and black screen appears
-----------
The whole process takes under a minute and the third screen is only up for a few seconds before the screen goes black. At this point, nothing changes.. the screen stays black. The fan seems to still be running after it is black and there was a little hard drive noise at the beginning of the black screen but I cannot hear any continued hard drive use 15sec + after black screen.
My guess is that it is either the hard drive or motherboard. The video card seems to work since it showed the screens at start-up. If this is a motherboard problem then I guess it is scrap. If it is a hard drive then maybe the is hope. I also have two Tivo Series 2 single tuner machines that I can use for parts/testing. Would it make sense to take a hard drive out of one of those and put it in the series 1?
Thank you,
Malc
When I plug it in I can hear the drive spin and feel the fan blowing air out the back of the unit. I can hear the drive reading data in what sounds like a normal manner.
Here is what happens when I try to start up the Tivo:
-------------
Green light comes on
First Screen:
"Your Recorder is starting up.
Please wait a moment.."
Second Screen:
"Almost there.
A few more seconds please..."
Third Screen
"Press POWER to turn on the
recorder."
Green light goes off and black screen appears
-----------
The whole process takes under a minute and the third screen is only up for a few seconds before the screen goes black. At this point, nothing changes.. the screen stays black. The fan seems to still be running after it is black and there was a little hard drive noise at the beginning of the black screen but I cannot hear any continued hard drive use 15sec + after black screen.
My guess is that it is either the hard drive or motherboard. The video card seems to work since it showed the screens at start-up. If this is a motherboard problem then I guess it is scrap. If it is a hard drive then maybe the is hope. I also have two Tivo Series 2 single tuner machines that I can use for parts/testing. Would it make sense to take a hard drive out of one of those and put it in the series 1?
Thank you,
Malc
Comment